11.21.2008

The leading manufacturer of sound masking & paging system with complete acoustical solutions

Direct Field Small Speaker

Model BP2

Direct Field Small Speaker

When a direct field speaker or system is required due to site conditions or application need, the Lencore Crossways™ system provides the highest level of sound quality and adjustability. Crossways™ offers a refreshing commercial grade direct field system using a higher quality construction and sound quality than competitive systems.

Tunable by hand-held remote and available in small and larger speaker sizes. Crossways™ offers wider sound dispersion, and better sound uniformity and greater sound quality.

Multiple random sound masking sources, coupled with Lencore’s E-Sound™ technology provide capabilities for:

  • Masking Adjustments: 96 in ½ dB steps
  • Contour Adjustments: 29 steps

Installation is simplified using plug and play Cat 5e cable with standard RJ12 connections. The Crossways™ speaker is equipped with dog ear screw adjustments and a locator pin to insure a smooth installation in ceiling tile or gypsum board.



More Information
Speaker Enclosure:
Speaker Body: ABS Plastic
Grill: Metal screen, white with perforated 3.5” grill
Overall diameter - 4.5”

Speaker Coverage: 100 sq. ft. (assuming a 10’ speaker separation)

Loudspeaker:
2-inch wide dispersion
Power Rating: 3 watts
Frequency Response: 250 Hz to 20 kHz
Sound Pressure Level (SPL): 76dB at 1 watt, 1 meter, 1 kHz
SPL for Masking Output: 30-78dBA
Impedance: 32 Ohms
Resonant Frequency in Enclosure: 247 Hz
Resonant Frequency out of Enclosure: 250 Hz ± 20%
Weight: 112g (4 oz)
Cone: Paper Cone w/Foam Edge

General Specifications:
Paging Input: via BP
Power Requirement: Powered by BP
Output Adjustment: N/A

Speaker Wire Requirements:
All wire must be plenum rated and UL listed.
Speakers use Cat 5e, 3 twisted pair and RJ12 connectors.
Crossover wire: Pin 1 to Pin 6, Pin 2 to Pin 5, etc.

Other System Wire Requirements:
16 gauge, plenum rated, stranded, 2-conductor wire (for power supply to BP).

System Power Supply: 48VDC, 150W for 192 speakers.

Installation:
Assembly to fit into a round hole, cut into ceiling tile or gypsum.
Three mounting locks spaced equidistant apart have secure screws for mounting.



The CrossWays™ Sound Masking System must provide the following:

  • Direct field speaker
  • All masking/paging units must be UL Listed for air handling space.
  • System must confirm following ANSI standards: ANSI S1.4, ANSI S1.6, and ANSI S1.11
  • System must meet ASTM 1130-02, ASTM E1573-02, ASTM E 1374-93, and ASTM E 1041-85 standards.
  • The Sound Masking system must use a unique integrated sound masking, music and paging system that uses infrared remote controls.
  • Volume increments for paging and music MUST be in ½ dB steps never to exceed more than 1dB steps as measured 1m from the speaker.
  • The sound masking source must produce 20Hz through 20,000Hz.
  • The masking must be random.
  • The masking volume shall be adjustable via digital means for ½ dB steps for a range of 30-78 dBA as measured 1m from the center of the speaker.
  • Sound masking system must be able to provide muting capabilities.
  • Spatial uniformity of sound must be no more than ±½ dBA.
  • In open areas and larger enclosed spaces, the overall sound level produced should have spatial uniformity of no more than ±½ dB between any two sound generating units.
  • System must provide two sizes of speaker: 4 ½" and 8".
  • 4 ½" speaker housing must be produced from recycled ABS material. 8" speaker housings/enclosures must be damped to avoid undesirable resonance.
  • System shall be designed so that individual speaker or component failure will have no impact on the balance of the system
  • Generation and integration of multiple random sound masking sources and by using E-sound® technology equates to the best sound and effective sound masking.
  • Sound masking equipment must be comprised of at least 50% recycled Aluminum content.
  • A 10 year full warranty from the manufacturer must be provided for all sound masking equipment.
  • The system must be manufactured in the USA.


 

All Lencore sound masking systems are custom designed to meet all local codes and to fit a variety of site conditions and applications in:

  • Open Plan
  • Closed Plan
  • Retrofit
  • New Construction


Applicable Environments

  • Commercial Office Interiors
  • Healthcare Facilities
  • Pharmacies
  • Financial Institutions
  • Doctors Offices
  • Banking Branch Offices
  • Call Center Environments
  • Government Facilities
  • Legal Institutions & Offices
  • Military Bases & SCIFS
  • Hotels
  • Library
  • Accounting Firms

Request a Quote

Use Lencore's Project Request Worksheet to request a quote.

INSTALLATION PHOTO