The Spectra i.Net™ Data Terminator is constructed of brushed aluminum and houses a PC board. Attached to the terminator is an integrated 7” Cat 5e plenum rated, UL listed, 4 twisted pair cable with a RJ45 connector. The terminator’s RJ45 connector is clicked into the last OP’s “OUT” data port. An integrated weight strap is attached for installation convenience. Hook up the terminator to the OP’s chain.

Enclosure: Brushed Aluminum
Dimensions: 3 ½” x 1 7/8” x 1”

Integrated Wire: Cat 5e, plenum rated, UL listed, 4 twisted pair cable with RJ45 connector

The Spectra i.Net™ Sound Masking System must provide the following:

• All masking/paging units must be UL Listed for air handling space
• System must confirm following ANSI standards: ANSI S1.4, ANSI S1.6, and ANSI S1.11
• System must meet ASTM 1130-02, ASTM E1573-02, ASTM E 1374-93, and ASTM E 1041-85 standards
• The Sound Masking system must use a unique integrated sound masking, music and paging system that uses the power of network technology, web appliances, internet access, infrared remote controls and digital signal processors (DSPs)
• The Sound Masking system must be capable of separately and independently configuring zones for sound masking, paging and music via the network empowered through its central control
• The Sound Masking system must produce 20Hz through 20,000Hz from its source
• The masking must be random and provide a minimum pattern of no LESS than 25 hours.
• The sound masking devices must provide both a 1/3 octave band equalizer for a minimum of 30 bands and a parametric equalizer to adjust the sound masking
• The paging devices must have a minimum of a 1/1 octave band equalizer to shape sound
• The masking volume shall be adjustable via digital means for ½ dB steps for a range of 36-84 dBA as measured 1m from the center of the speaker
• Sound masking system must be able to provide music muting capabilities to allow paging to smoothly override masking
• Spatial uniformity of sound must be no more than ±½ dBA
• Sound masking, paging and music must have individual identifiers located in an integrated LCD screen
• Plenum mounted network locations must have a lighted LED for visual inspection.
• System must be a multi-drop network system. Point to point systems are unacceptable
• System must be capable of being tuned through a network and a hand-held remote
• The system must be capable of being independently zoned on both a global and local level for sound masking, paging and music. All zoning must be controlled from a network appliance
• Generation and integration of multiple random sound masking sources and by using E-sound® technology equates to the best sound and effective sound masking
• System must be capable of performing a complete diagnostics of its entire functions including diagnostics of the network, hubs, nodes, routers, dsps, memory, circuitry, amplifiers and power
• System must be capable of reporting entire settings for each zone for masking, paging and music indicating at a minimum the volume, contour, 1/3rd band octave equalization, parametric equalization, diagnostics, and groupings
• System must be an open platform system. Proprietary software systems are UNACCEPTABLE.
• System must be capable of using off the shelf browser software for full manipulation
• System must be capable of being used as a stand-alone system or a system tied into an intranet IT spine or manipulated through the internet
• Speaker housings/enclosures must be damped to avoid undesirable resonance
• System shall be designed so that individual speaker or component failure will have no impact on the balance of the system
• Security: Central control must only be able to be accessed via an authorized computer access point with the use of a password
• Sound masking equipment must be comprised of at least 50% recycled content
• A 10 year full warranty from the manufacturer must be provided for all sound masking equipment
• The system must be manufactured in the USA